Cell Room Fungicides

To eliminate bacteria and fungi in cell rooms, it is essential to employ effective methods for their eradication. By employing appropriate techniques, we can successfully remove these microorganisms and ensure a cleaner and healthier environment.
This product possesses impressive antibacterial properties and is capable of effectively controlling pollution in a cell room environment. It achieves this by eliminating microscopic particles present in the room.
The prevention of cell pollution by bacteria, fungi, and their spores is a highly effective measure. This not only helps in reducing the impact on human resources, financial resources, and time but also ensures the overall cleanliness and health of cells.
Waste on the other side.

One recommended method to effectively use the spray is to apply it directly to the more hidden and challenging corners, walls, and spaces within a cell room. Alternatively, you could pour out a little and use an absorbent cotton ball to wipe and ensure thorough coverage. It is advisable to treat regularly, approximately once a week, preferably while utilizing ultraviolet light for maximum impact.
For optimal results, it is recommended to use 5-8 mL per cubic meter (m3). For instance, a room measuring 10m2 with a height of 3m requires about 150 mL of the solution. During periods of increased pollution outbreaks, such as during the plum rain season, it is appropriate to increase the amount used.
In the event mold grows on indoor walls, you can spray the solution directly on the wall's surface or soak a cotton ball in the solution and wipe the affected area. Following this procedure should result in a cleaner living environment.

The product should be kept in a cool place at room temperature for a duration of 2 years.

(1) Ensure that you wear suitable protective attire and gloves while operating. (2) Once the procedure is completed, it is advisable for individuals to maintain a safe distance from the cell culture room and allow for proper ventilation for 10 minutes, after sealing it for 20-30 minutes. (3) Take precautionary measures to prevent direct contact with your skin and eyes. If accidental contact occurs, promptly rinse with ample water without any delay.